AIE3 IP DataTelCoax Report 1 Remote 5 ID

Kenmerk

• Displays length measurement for each pair in feet or meters using TDR technology
• Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
• Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
• Link light to identify location on a hub/switch/router port
• Tests Ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
• Generates selectable tones on selected pins for use with tone tracers
• Supports up to 8 testing and ID remotes for network and telephone cables
• Supports up to 20 network and coax ID-only mapping remotes.
• View saved cable tests
• Full color graphical wire-mapping
• Ability to define cable name, save cable tests and print all results (cable testing and network testing)
• Multilingual (English, French, Spanish)
• Physical features:
  - High resolution full color graphical display
  - Displays wire map in color per TIA-568A/B color codes, in pin or pair order (configurable)
  - Protective rubber boot
  - Micro USB connector (to export cable reports), RJ45 connector and coax connector

Specificatie

Measurement Technology:	Time Domain Reflectometry (TDR)
Cable Measurements:	Cable Testing and ID: 305 m (up to 1000 ft)
	Split Pair Detection: 1m (3 ft) to 305m (1,000 ft)
	Length Measurement: 457m (0 to 1,500 ft), ± (5%+1ft)
	Length Measurement: 457m (0 to 1,500 ft), ± (5%+1ft)
	Supports 20 RJ-45 and 20 F-connector ID only remotes
Power over Ethernet:	Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
	Tests for classes and loads cable up to 25.5 Watts
	(at class 4) Identifies Mode A or B (pairs with PoE)
Active Ethernet:	Indicates advertised speeds of 10/100/1000base-t half or full duplex
	Can Link to network at 10/100base-t
Maximum Voltage:	Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester. - RJ Jack: 66 Vdc or 55 Vac - F-connector: 50 Vdc or Vac
Save Test Results:	Stores up to 250 Cable or network tests with user defined names
Tone Generation:	Tone Frequencies: 730 Hz and 1440 Hz
IPv6 & IPv4 Support:	Yes
VLAN discovery:	Yes
Discovery Protocols:	(CDP, LLDP, NDP)
Port Discovery:	Yes
Phone Service Detection:	Yes
Ping:	Yes
Number of Targets:	10+
DHCP:	Yes
URL entry:	Yes
Manual address entry:	Yes
Validate Link:	Yes
Languages:	English, French, Spanish
Battery Life:	For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
	Operating - 20 hours typical
	Standby - Life of battery (20uA max)
Operating altitude:	3048m (10,000 ft)
Operating temperature:	0 to 50°C (32 to 122°F)
Storage temperature:	-30 to 60°C (-22 to +140°F)
Humidity:	10 to 90% non-condensing
Enclosure:	High-strength PC/ABS plastic with V0 rating with boot
	Withstands 4 foot drop on to concrete
Size:	4.7 x 9.15 x 17.3 cm (1.85”H x 3.6”W x 6.8”L)
Weight with Batteries:	510grams (1 lb 2 oz)
Goedkeuring:	CE, RoHS and WEEE

 

Content

- AIE3 IP DataTelCoax Report 1 Remote 5 ID
- AHY5 Set Coax ID Remote 1-5 Data ID Remote 1-5 Verloop F female
- AHY8 Data Remote 1 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
- RJ12 Cable (2x)
- AHV8 Kabel USB naar USB
- AHX0 Tas
- GB10 Gebruiksaanwijzing

Optie

Prijs

Prijzen zijn per stuk, exclusief 21% BTW en gelden voor levering af magazijn Voorthuizen. Bij levering in Nederland of in België worden verzendkosten altijd in rekening gebracht tot maximaal EUR 25,00. Ditzelfde geldt voor expreskosten en/of rembourskosten. Bij de producten trainingen en cursussen is na het bevestigen van de cursusdatum, bij het niet verschijnen van de deelnemer(s), de verplichting ontstaan tot volledige betaling. Het volgen op een latere datum ingeval van niet verschijnen is in overleg mogelijk, maar wordt uitsluitend gezien als service. Hieruit kan geen enkel recht uit worden onttrokken.